The MEMOLUB EPS series is supplied with a 30cm wire lead that is connected to an external power source. A constant 24VDC power is supplied during periods of machine operation and will continue to follow the program until power is removed. When initial power is supplied to the MEMOLUB EPS Series lubricators they will cycle once and then follow the preset program of choice. When power is turned off the lubrication cycle stops until power is reestablished.

Memolub EPS Series
Lubricate on the pace of your equipment.
- Reusable single & multi-point automatic lubrication system.
- 24V powered.
- 25 bar ejection pressure.
- Up to 8 lubrication points simultaneously.
- Remote installation up to 8m.
- 7 Settings.
- Optional build-in visual feedback.
Powered externally.

NEW
VISUAL FEEDBACK
AS A PLUS
The newly added MEMOLUB EPS PLUS models include an integrated visual feedback system, providing clear indicators of operation and alerts for any issues, ensuring reliability and ease of maintenance across a wide range of applications.

The right volume at the right frequency.
There are 7 basic frequency settings that are suitable for most industrial applications. They are programmed by installing one or a combination of the three colored timing rings into the ring holder attached to the brass fitting. When you screw the MEMOLUB lubricator onto the brass fitting, the timing rings depress the switches on the bottom of the lubricator. The combination of the depressed switches will determine the pumping frequency. Included in the kit are eight spacer washers for adjusting the amount of lubricant discharged per pumping cycle.

A POWERFUL AND EFFICIENT PUMP
The Memolub EPS series pump is engineered to deliver powerful output pressure (25bar/350psi) and is capable of pumping low- and high viscosity lubricants at extreme temperatures. Thanks to the patented electro-mechanical technology inside Memolub EPS series, the system is safe for the negative consequences of back-pressure.

MEMOLUB OIL R-500 compatible.
MEMOLUB OIL R-500 is a refillable 500cc reservoir for oil applications, compatible with MEMOLUB EPS series.

CASE STUDIES

Automatic lubrication in a French fries factory.

Automating chain lubrication in freezing conditions.

Automating lubrication for water gate infrastructure.

Lubricate pivot pins on fixed satellite antennas.

Lubrication of the bearings of a single and double cable drum twister.

Lubrication of the propeller shaft bearing and the clutch of a truck.

Optimizing lubrication for a mobile drilling machine.
TECHNICAL SPECIFICATIONS
All the essential information about the Memolub EPS Series is gathered into one comprehensive support and knowledge base. Whether you need technical specifications, installation guides, troubleshooting tips, or maintenance advice, our centralised hub has you covered.
