The MEMOLUB® HPS is a versatile electromechanical lubricator that can be installed on a single lube point or coupled with a progressive distribution valve to lubricate up to 8 points. The MEMOLUB® HPS lubricator automatically delivers a small, precise amount of lubricant at regular intervals for a continuous supply of fresh lubricant directly to your lube point.
Memolub HPS
The most versatile lubricator around.
- Reusable autonomous single & multi-point lubrication system.
- Battery powered.
- 350psi (25 bar) ejection pressure.
- Up to 12 outlets.
- Remote installation up to 40 feet (12 m).
- 52 Settings.
Lubrication, automated.
THE RIGHT VOLUME AT THE RIGHT FREQUENCY.
There are 7 basic frequency settings that are suitable for most industrial applications. They are programmed by installing one or a combination of the three colored timing rings into the ring holder attached to the brass fitting. When you screw the MEMOLUB® lubricator onto the brass fitting, the timing rings depress the switches on the bottom of the lubricator. The combination of the depressed switches will determine the pumping frequency. Included in the kit are eight spacer washers for adjusting the amount of lubricant discharged per pumping cycle.
A POWERFUL AND EFFICIENT PUMP
The Memolub HPS pump is engineered to deliver powerful output pressure (25bar/350psi) and is capable of pumping low- and high viscosity lubricants at extreme temperatures. Thanks to the patented electro-mechanical technology inside Memolub EPS, the system is safe for the negative consequences of system back-pressure.
MEMOLUB® OIL R-500 Compatible
MEMOLUB® OIL R-500 is a refillable 500cc reservoir for oil applications, compatible with MEMOLUB® HPS.
The MEMOLUB® HPS is a versatile electromechanical lubricator that can be installed on a single lube point or coupled with a progressive distribution valve to lubricate up to 8 points. The MEMOLUB® HPS lubricator automatically delivers a small, precise amount of lubricant at regular intervals for a continuous supply of fresh lubricant directly to your lube point.
THE RIGHT VOLUME AT THE RIGHT FREQUENCY.
There are 7 basic frequency settings that are suitable for most industrial applications. They are programmed by installing one or a combination of the three colored timing rings into the ring holder attached to the brass fitting. When you screw the MEMOLUB® lubricator onto the brass fitting, the timing rings depress the switches on the bottom of the lubricator. Included in the kit are eight spacer washers for adjusting the amount of lubricant discharged per lube cycle. Installing one, or a combination of all eight washers, into the fitting will limit the stroke length of the piston inside the lubricator.