LUBEGEAR STRAIGHT TOOTHED

Ref. 7450

The LUBEGEAR applicators are made of toothed polymer segments. Due to this segmented structure, a wide variety of gear widths are possible.

The open-cell structure of the polymer foam allows the lubrication gear to hold a large volume of lubricant and to release it in a metered manner. As a result, a homogeneous film of lubricant forms on the gears to be lubricated, ensuring ideal lubrication over a long period of time.

Relubrication takes place through holes in the mounting axis and delivery channels in the gear segments themselves.

The advantages of this application method are summarized:

Avoidance of insufficient lubrication and wear on the gear surfaces
with correct dosage no overlubrication and thus no unnecessary contamination
easy and flexible mounting of the lubrication gears

FEATURES

Feature	Description
Chemical resistance:	Very good
Wear characteristics:	Very good
Paint compatibility:	Tested and approved
Silicone-free:	Tested and approved
Hub:	Plain bearing and sealed

Dimensions

Module [mm]	Width [mm]	Number of teeth Z	Outer diameter Da [mm]	Hole diameter di [mm]	Pitch diameter Tk [mm]
2	20	17	38	12	34
3	30	17	57	12	51
4	40	17	76	12	68
5	50	17	95	20	85
6	60	17	114	20	102
8	80	17	152	20	136
10	100	13	150	20	130

Technical specifications


Type of gearing:	Straight
Available module sizes:	Module 2 up to module 10
Operating temperature:	Min. – 30 °C (– 22 °F), Max. +140 °C (+ 284 °F)
Max. velocity:	5 m/s > 2 m/s use splash guard
Material segment discs:	Special-Polymer-Foam
Material density:	240 kg/m²

Module [mm]	Width [mm]	Number of teeth Z	Outer diameter Da [mm]	Hole diameter di [mm]	Pitch diameter Tk [mm]
2	20	17	38	12	34
3	30	17	57	12	51
4	40	17	76	12	68
5	50	17	95	20	85
6	60	17	114	20	102
8	80	17	152	20	136
10	100	13	150	20	130

Module [mm]	Width [mm]	Number of teeth Z	Outer diameter Da [mm]	Hole diameter di [mm]	Pitch diameter Tk [mm]
2	20	17	38	12	34
3	30	17	57	12	51
4	40	17	76	12	68
5	50	17	95	20	85
6	60	17	114	20	102
8	80	17	152	20	136
10	100	13	150	20	130

Module [mm]	Width [mm]	Number of teeth Z	Outer diameter Da [mm]	Hole diameter di [mm]	Pitch diameter Tk [mm]
2	20	17	38	12	34
3	30	17	57	12	51
4	40	17	76	12	68
5	50	17	95	20	85
6	60	17	114	20	102
8	80	17	152	20	136
10	100	13	150	20	130