-
6 DIN CABLE WITH ELBOW CONNECTOR
6 DIN female moulded elbow connector with 2m cable to power MEMOLUB VISIO EP. -
6 DIN CABLE WITH STRAIGHT CONNECTOR
6 DIN female moulded straight connector with 2m cable to power MEMOLUB VISIO EP. -
ADAPTOR G-1/4F-G-1/8F
To be installed on the lubrication point if necessary. Ideal for brush applications. -
ADAPTOR G-1/4M-G-1/8M Conical 60°
To be installed on the lubrication point if necessary. -
ADAPTOR G-1/8F-G-1/8F
To be installed on the lubrication point if necessary. Ideal for brush applications. -
ADAPTOR G-1/8F-M10x100
To be installed on the lubrication point if necessary. -
ADAPTOR G-1/8F-M10x125
To be installed on the lubrication point if necessary. -
ADAPTOR G-1/8F-M10x150
To be installed on the lubrication point if necessary. -
ADAPTOR G-1/8F-M12x125
To be installed on the lubrication point if necessary. -
ADAPTOR G-1/8F-M12x150
To be installed on the lubrication point if necessary. -
ADAPTOR G-1/8F-M12x175
To be installed on the lubrication point if necessary. -
ADAPTOR G-1/8F-M5x080
To be installed on the lubrication point if necessary. -
ADAPTOR G-1/8F-M6x075
To be installed on the lubrication point if necessary. -
ADAPTOR G-1/8F-M6x100
To be installed on the lubrication point if necessary. -
ADAPTOR G-1/8F-M8x100
To be installed on the lubrication point if necessary. -
ADAPTOR G-1/8F-M8x125
To be installed on the lubrication point if necessary. -
ADAPTOR G-1/8M-G-1/4F
To be installed on the lubrication point if necessary. Ideal for brush applications. -
BRASS METAL ELBOW FITTING T6-G1/4M
Standard application. -
BRASS METAL ELBOW FITTING T8-G1/4M
Standard application. -
BRASS METAL ELBOW FITTING T8-G1/8M
Standard application. -
BRASS METAL STRAIGHT FITTING T6-G-1/4M
Standard application. -
New
BRASS METAL STRAIGHT FITTING T6-G-1/8M
-
BRASS METAL STRAIGHT FITTING T6-G-1/8M
Standard application. -
BRASS METAL STRAIGHT FITTING T8-G-1/8M
Standard application. -
New
BRASS METAL STRAIGHT FITTING T8-G1/4F
Standard application. -
BRASS METAL STRAIGHT FITTING T8-G1/4M
Standard application. -
BRASS METAL STRAIGHT UNION FITTING T8
Standard application. -
BRUSH BRACKET
Stainless steel -
BULCK-HEAD FITTING T8
Standard application. -
CONSOLIDATED TUBE T6 (POLYAMIDE/NYLON) - 1M
For cutting risk applications. Up to 30 bar. Maximum temperature 70°C -
CONSOLIDATED TUBE T8 (POLYAMIDE/NYLON) - 1M
For cutting risk applications. Up to 30 bar. Maximum temperature 70°C -
CRANE RAIL LUBRICATOR
Facilitates the lubrication of the sides of overhead crane rails. -
DISTRIBUTOR BLOCK BRACKET
For distributor blocks with 2/4/6/8 outlets, stainless steel. -
DISTRIBUTOR BLOCK BRIDGE (HORIZONTAL)
Bypass to modify the number of outlets on the distributor block. -
DISTRIBUTOR BLOCK BRIDGE (VERTICAL)
Bypass to modify the number of outlets on the distributor block. -
DISTRIBUTOR BLOCK DB10
-
DISTRIBUTOR BLOCK DB10 + Mechanical Switch
-
DISTRIBUTOR BLOCK DB12
-
DISTRIBUTOR BLOCK DB12 + Mechanical Switch
-
DISTRIBUTOR BLOCK DB2
-
DISTRIBUTOR BLOCK DB4
-
DISTRIBUTOR BLOCK DB4 + Mechanical Switch
-
DISTRIBUTOR BLOCK DB6
-
DISTRIBUTOR BLOCK DB6 + Mechanical Switch
-
DISTRIBUTOR BLOCK DB8
-
DISTRIBUTOR BLOCK DB8 + Mechanical Switch
-
DISTRIBUTOR KIT DB2
Including a Distributor Block DB2 (Ref. 2945) + Distributor Block Bracket (Ref. 2760) + installation kit DB(Ref. 2931). -
DISTRIBUTOR KIT DB4
Including a Distributor Block DB4 (Ref. 2944) + Distributor Block Bracket (Ref. 2760) + installation kit DB(Ref. 2931). -
DISTRIBUTOR KIT DB4 + Mechanical Switch
Including a Distributor Block DB4RL (Ref. 2707) + Distributor Block Bracket (Ref. 2760) + installation kit DB(Ref. 2931). -
DISTRIBUTOR KIT DB6
Including a Distributor Block DB6 (Ref. 2940) + Distributor Block Bracket (Ref. 2760) + installation kit DB(Ref. 2931). -
DISTRIBUTOR KIT DB6 + Mechanical Switch
Including a Distributor Block DB6RL + Mechanical Switch (Ref. 2708) + Distributor Block Bracket (Ref. 2760) + installation kit DB(Ref. 2931). -
DISTRIBUTOR KIT DB8
Including a Distributor Block DB8 (Ref. 2941) + Distributor Block Bracket (Ref. 2760) + installation kit DB(Ref. 2931). -
DISTRIBUTOR KIT DB8 + Mechanical Switch
Including a Distributor Block DB8RL + Mechanical Switch (Ref. 2709) + Distributor Block Bracket (Ref. 2760) + installation kit DB(Ref. 2931). -
FLAT LUBRICATION BRUSH 30mm (NYLON) + ADAPTOR
NPT-1/8-F. Maximum temperature: 100°C. -
FLAT LUBRICATION BRUSH 60mm (HORSEHAIR)
NPT-1/8-F. Maximum temperature: 180°C. -
GREASE SPLITTER
Only for NLGI0 or NLGI1 greases. Applicable on all MEMOLUB® HPS, EPS, EPS MEMORY and PLCD devices. -
GREASE SPLITTER KIT
Including a Grease Splitter (Ref. 1910) and the necessary fittings. Only for NLGI0 or NLGI1 greases. -
GREASING NIPPLE MEMO SCREW F-M14
Greasing nipple installed to fill empty tubes after installation. Compatible with MEMOLUB® HPS, EPS, EPS MEMORY and PLCD devices. -
GREASING NIPPLE MEMO SCREW F-M16
Greasing nipple installed to fill empty tubes after installation. Compatible with MEMOLUB® VISIO, VISIO EP, ONE and EM models. -
HEX KEY PUSH-IN ELBOW FITTING T8-G1/8M
Standard application. -
HEX KEY PUSH-IN STRAIGHT FITTING TAPER T6-G1/8M
Standard application. -
HEX KEY PUSH-IN STRAIGHT FITTING TAPER T8-G1/8M
Standard application. -
HIGH PRESSURE ELBOW FITTING T14,3 MALE
-
HIGH PRESSURE ELBOW FITTING T8 MALE
-
HIGH PRESSURE STRAIGHT FITTING T14,3 FEMALE
-
HIGH PRESSURE STRAIGHT FITTING T14,3 MALE
-
HIGH PRESSURE STRAIGHT FITTING T8 FEMALE
-
HIGH PRESSURE STRAIGHT FITTING T8 MALE
-
HIGH PRESURE TUBE T14.3
Compatible with MEMOLUB® DS. For grease network installation. Up to 350 bar. Maximum temperature 70°C -
HIGH PRESURE TUBE T8
Compatible with all MEMOLUB® single & multipoint automatic lubricators + MEMOLUB® DS. For grease network installation. Up to 350 bar. Maximum temperature 70°C -
New
INDUCTIVE PROXIMITY SWITCH BES M12MF
Optional 24V powered inductive sensor for DB kit, delivered with a 0,6m cable. -
LEVEL CONTROL 24V
Optional 24V powered inductive sensor with a low lubricant level alarm, connected to your PLC. Compatible with all MEMOLUB® single & multipoint automatic lubricators. -
LEVEL CONTROL 9V
Optional battery powered inductive sensor with a visual low lubricant level alarm, batteries 9VDC. Compatible with all MEMOLUB® single & multipoint automatic lubricators. -
LUBEGEAR HELICAL LEFT
On request. For module 1.5 up to 10 geartypes. For grease application up to NLGI2 or oil applications up to 30.000 cSt. Temperature rage: -30°C up to +90°C / +140°C. -
LUBEGEAR HELICAL RIGHT
On request. For module 1.5 up to 10 geartypes. For grease application up to NLGI2 or oil applications up to 30.000 cSt. Temperature rage: -30°C up to +90°C / +140°C. -
LUBEPINION
On request. For simplex, duplex and triplex chaintypes. For oil applications from 15 to 320 cSt. Temperature rage: -30°C up to +140°C. -
LUBEROLL KIT T6
On request. Made from special polymer foam. For oil applications from 15 to 320 cSt. Temperature rage: -30°C up to +80°C. -
LUBESTRIP KIT WITH ELBOW FITTING T6
On request. Very wear-resistent alternative to 50mm wide brushes. For oil applications from 15 to 320 cSt. Temperature rage: -30°C up to +80°C. -
New
LUBESTRIP KIT WITH STRAIGHT FITTING T6
On request. Very wear-resistent alternative to 50mm wide brushes. For oil applications from 15 to 320 cSt. Temperature rage: -30°C up to +80°C. -
MEMOLUB VISIO® or VISIO PRO PUMP
Replacement pump for MEMOLUB® VISIO AND VISIO PRO (Ref. 6311, 6312, 6313, 6317, 6321, 6322, 6323 and 6327)
-
New
MEMOLUB VISIO/ONE DEMOCASE
Aluminium case (330x240x165mm) for demonstration purposes, including a MEMOLUB® VISIO EP 240cc (ref. 6322), a MEMOLUB® ONE 240cc pump (ref. 1050), a green Memo, a custom demonstration bracket and distribution kit, an Alkaline battery pack (ref. 5001), an Lithium battery pack (ref. 5003), 1 empty 240cc cartridge, 1 empty 480cc cartridge, 1 Cover and Lid MEMOLUB® OIL R-500, a MEMOLUB® WRENCH (Ref. 8120) and 2 fittings. -
MEMOLUB® 120cc HOUSING KIT
Including a housing, spring and closing ring compatible with all MEMOLUB® single & multipoint automatic lubricators. -
MEMOLUB® 240cc HOUSING KIT
Including a housing, spring and closing ring compatible with all MEMOLUB® single & multipoint automatic lubricators. -
MEMOLUB® 480cc HOUSING KIT
Including a housing, spring and closing ring compatible with all MEMOLUB® single & multipoint automatic lubricators. -
MEMOLUB® BATTERY PACK
Box of 5 battery packs. 3x 1.5V AA Alkaline batteries. -
MEMOLUB® BATTERY PACK LITHIUM
Box of 5 battery packs. 3x 1.5V AA Lihium batteries. -
MEMOLUB® BATTERY SEAL
Protection seal for the batteries in grease applications. -
MEMOLUB® DEMOKIT HPS
Aluminium case (330x240x165mm) for demonstration purposes, including a MEMOLUB® HPS 240cc (ref. 6001), a MEMOLUB® ONE 240cc pump (ref. 1050), a green Memo, a custom demonstration bracket and distribution kit, an Alkaline battery pack (ref. 5001), an Lithium battery pack (ref. 5003), 1 empty 240cc cartridge, 1 empty 480cc cartridge, 1 Cover and Lid MEMOLUB® OIL R-500, a MEMOLUB® WRENCH (Ref. 8120) and 2 fittings. -
Memolub® DS
- Reusable multi-point lubrication system.
- 24V powered.
- 70 bar ejection pressure.
- Up to 20 outlets.
- Remote installation up to 20m.
- PLC driven settings if desired.
- Flexible pumping cycle settings.
-
MEMOLUB® DS COVER 18/30kg
Cover for buckets of 18-30kg, ø 320mm. -
MEMOLUB® DS COVER 50/60kg
Cover for buckets of 50-60kg, ø 395mm. -
MEMOLUB® DS ELECTRONIC BOX
Control unit to ajust the frequency of the Memolub® DS18 and DS50 Pumps (Ref. 1800 / 1801). -
MEMOLUB® DS FOLLOWER PLATE 18kg
Tailor made solution to ease emptying buckets of 18-30kg with a plastic liner inside. -
MEMOLUB® DS FOLLOWER PLATE 50kg
Tailor made solution to ease emptying pails of 50-60kg with a plastic liner inside. -
MEMOLUB® DS GREASE VOLUME DETECTOR KIT
Including Proximity Sensor (24V), guidance bar, external indicator light and a mounting bracket. -
MEMOLUB® DS OIL VOLUME SENSOR
Floating sensor to extend the Memolub® DS Grease Volume Detector kit (Ref. 2894) to oil applications. -
MEMOLUB® DS REMOTE CONTROL
Check function control with a 5m cable and a 6-DIN connector. -
MEMOLUB® DS18 PUMP
Pneumatic dosing pump for 18-30 kg lubricants with a maximum presure of 100 bar. Ratio: 1/20. -
MEMOLUB® DS18/50 INSTALLATION KIT
Including a presure gauge to control system pressure with a manual air vent and the nessecairy fittings. -
MEMOLUB® DS18/50 PUMP INSTALLATION KIT
Including a presure gauge to control system pressure with a manual air vent and the nessecairy fittings. -
MEMOLUB® DS50 PUMP
Pneumatic dosing pump for 50 kg lubricants with a maximum presure of 100 bar. Ratio: 1/20. -
MEMOLUB® EM 120cc
Battery powered, reusable singlepoint lubrication system. Remote installation up to 2m. 2 settings. -
MEMOLUB® EM MEMO KIT
Including MEMOLUB® EM RED + WHITE MEMO (Ref. 2433, Ref. 2434). -
MEMOLUB® EM PUMP
Replacement pump for MEMOLUB® EM (Ref. 6130). -
MEMOLUB® EPS 120cc
24V powered, reusable single & multi-point lubrication system. Up to 8 outlets. Remote installation up to 8m. 52 settings. -
MEMOLUB® EPS 240cc
24V powered, reusable single & multi-point lubrication system. Up to 8 outlets. Remote installation up to 8m. 52 settings. -
MEMOLUB® EPS 480cc
24V powered, reusable single & multi-point lubrication system. Up to 8 outlets. Remote installation up to 8m. 52 settings. -
MEMOLUB® EPS Memory 240cc
24V powered, reusable single & multi-point lubrication system with internal memory to register elapsed time since the last stroke. Up to 8 outlets. Remote installation up to 8m. 52 settings. -
MEMOLUB® EPS OIL R-500
24V powered, reusable single & multi-point lubrication system for oil applications. Up to 8 outlets. Remote installation up to 8m. 52 settings. -
MEMOLUB® EPS PUMP
Replacement pump for MEMOLUB® EPS (Ref. 6020, Ref. 6021, Ref. 6022, Ref. 6027 ). -
Memolub® HPS
- Reusable autonomous single & multi-point lubrication system.
- Battery powered.
- 350psi (25 bar) ejection pressure.
- Up to 12 outlets.
- Remote installation up to 40 feet (12 m).
- 52 Settings.
- Reusable autonomous single & multi-point lubrication system.
-
MEMOLUB® HPS 120cc
Battery powered, reusable single & multi-point lubrication system. Up to 8 outlets. Remote installation up to 8m. 52 settings. -
MEMOLUB® HPS 240cc
Battery powered, reusable single & multi-point lubrication system. Up to 8 outlets. Remote installation up to 8m. 52 settings. -
MEMOLUB® HPS 480cc
Battery powered, reusable single & multi-point lubrication system. Up to 8 outlets. Remote installation up to 8m. 52 settings. -
MEMOLUB® HPS OIL R-500
Battery powered, reusable single & multi-point lubrication system. Up to 8 outlets. Remote installation up to 8m. Only suitable for oil applications. 52 settings. -
MEMOLUB® HPS PUMP
Replacement pump for MEMOLUB® HPS (Ref. 6000, Ref. 6001, Ref. 6002, Ref. 6007 ). -
MEMOLUB® HPS/EPS MEMO KIT
Including a fitting, a holder, a seal and 3 frequency rings. -
MEMOLUB® MEMO KIT + Memo Base Check Valve
For oil applications only. Applicable on all MEMOLUB® VISIO, VISIO EP, HPS, EPS, EPS MEMORY and PLCD devices. -
Memolub® Memory
- Reusable single & multi-point lubrication system.
- Internal memory to register elapsed time until next stroke.
- 24V powered.
- 140psi (25 bar) ejection pressure.
- Up to 12 outlets.
- Remote installation up to 40 feet (12 m).
- 52 Settings.
-
MEMOLUB® Memory 120cc
24V powered, reusable single & multi-point lubrication system with internal memory to register elapsed time since the last stroke. Up to 8 outlets. Remote installation up to 8m. 52 settings. -
MEMOLUB® MEMORY 480cc
24V powered, reusable single & multi-point lubrication system with internal memory to register elapsed time since the last stroke. Up to 8 outlets. Remote installation up to 8m. 52 settings. -
MEMOLUB® MEMORY PUMP
Replacement pump for MEMOLUB® MEMORY (Ref. 6621, Ref. 6622, Ref. 6624).
-
MEMOLUB® Oil R-500 BATTERY FELT
Protection felt for the batteries in all oil applications. -
MEMOLUB® Oil R-500 JAR KIT
Including a 500ml oil reservoir, a MEMOLUB OIL R-500 battery felt (ref. 6501) and closing ring compatible with all MEMOLUB® single & multipoint automatic lubricators. -
MEMOLUB® ONE 240cc
Battery powered, reusable singlepoint lubrication system. Remote installation up to 2m. 4 settings. -
MEMOLUB® ONE 240cc STARTER PACK - Castrol Optileb UF1-H1
Including MEMOLUB® ONE (Ref. 6110), a filled cartridge with Castrol Optileb UF1-H1, a mounting bracked and 2m of prefilled 4/6mm tubing. -
MEMOLUB® ONE 240cc STARTER PACK - Castrol Tribol GR100-2PD
Including MEMOLUB® ONE (Ref. 6110), a filled cartridge with Castrol Tribol GR100-2PD, a mounting bracked and 2m of prefilled 4/6mm tubing. -
MEMOLUB® ONE 240cc STARTER PACK - Empty
Including MEMOLUB® ONE (Ref. 6110), an empty cartridge, a mounting bracked and 2m 4/6mm tubing. -
MEMOLUB® ONE 240cc STARTER PACK - MemoMulti2
Including MEMOLUB® ONE (Ref. 6110), a filled cartridge with MEMOMULTI2, a mounting bracked and 2m of prefilled 4/6mm tubing. -
MEMOLUB® ONE GREEN MEMO
Stroke and frequency regulator. Time to empty: 3 months. Output: 2.4cm3/day. -
MEMOLUB® ONE MEMO KIT
Including MEMOLUB® ONE RED + WHITE + YELLOW + GREEN MEMO (Ref. 2433, Ref. 2434, Ref. 2535, Ref. 2436). -
MEMOLUB® ONE OIL R-500
Battery powered, reusable singlepoint lubrication system for oil applications. Remote installation up to 2m. 4 settings. -
MEMOLUB® ONE PUMP
Replacement pump for MEMOLUB® ONE (Ref. 6110). -
MEMOLUB® ONE YELLOW MEMO
Stroke and frequency regulator. Time to empty: 1 month. Output: 7.2cm3/day. -
MEMOLUB® ONE/EM EXTENSION KIT
Including : a mounting bracket (Ref. 7201) and a 4/6mm fitting (Ref. 2729). -
MEMOLUB® ONE/EM RED MEMO
Stroke and frequency regulator. Time to empty: 6 - 12 months. Output: 1.2cm3/day - 0.3cm3/day -
MEMOLUB® ONE/EM WHITE MEMO
Stroke and frequency regulator. Time to empty: 12 - 24 months. Output: 0.6cm3/day - 0.15cm3/day -
Memolub® PLCD
- Reusable single & multi-point lubrication system.
- 24V powered.
- 140psi (25 bar) ejection pressure.
- Up to 12 outlets.
- Remote installation up to 40 feet (12 m).
- PLC driven settings.
- Easy to incorporate in closed-loop feedback systems.
-
MEMOLUB® PLCD 120cc
24V powered, reusable single & multi-point lubrication system. Up to 8 outlets. Remote installation up to 8m. PLC driven settings. -
MEMOLUB® PLCD 240cc
24V powered, reusable single & multi-point lubrication system. Up to 8 outlets. Remote installation up to 8m. PLC driven settings. -
MEMOLUB® PLCD 480cc
24V powered, reusable single & multi-point lubrication system. Up to 8 outlets. Remote installation up to 8m. PLC driven settings. -
MEMOLUB® PLCD MEMO KIT
Stroke and frequency regulator. Including a 30cm connection cable to connect your PLC. -
MEMOLUB® PLCD OIL R-500
24V powered, reusable single & multi-point lubrication system for oil applications. Up to 8 outlets. Remote installation up to 8m. PLC driven settings. -
MEMOLUB® PLCD PUMP
Replacement pump for MEMOLUB® PLCD (Ref. 6010, Ref. 6011, Ref. 6012, Ref. 6017 ). -
MEMOLUB® PROTECTION COVER 120-240cc
Additional protection cover for harsh and dusty environments. Compatible with all MEMOLUB® single & multipoint automatic lubricators. -
MEMOLUB® PROTECTION COVER 480cc
Additional protection cover for harsh and dusty environments. Compatible with all MEMOLUB® single & multipoint automatic lubricators. -
MEMOLUB® VISIO 120cc
Battery powered, reusable single & multi-point lubrication system with visual feedback. Up to 8 outlets. Remote installation up to 8m. 72 settings. -
MEMOLUB® VISIO 240cc
Battery powered, reusable single & multi-point lubrication system with visual feedback. Up to 8 outlets. Remote installation up to 8m. 72 settings. -
MEMOLUB® VISIO 480cc
Battery powered, reusable single & multi-point lubrication system with visual feedback. Up to 8 outlets. Remote installation up to 8m. 72 settings. -
MEMOLUB® VISIO EP 120cc
24V powered, reusable single & multi-point lubrication system with visual feedback. Up to 8 outlets. Remote installation up to 8m. 72 settings or PLC driven -
MEMOLUB® VISIO EP 240cc
24V powered, reusable single & multi-point lubrication system with visual feedback. Up to 8 outlets. Remote installation up to 8m. 72 settings or PLC driven -
MEMOLUB® VISIO EP 480cc
24V powered, reusable single & multi-point lubrication system with visual feedback. Up to 8 outlets. Remote installation up to 8m. 72 settings or PLC driven -
MEMOLUB® VISIO EP MEMO BASE
24V powered electronic stroke and frequency regulator and home to the onboard visual feedback system. 6-DIN connection. Delivered with a settings key. -
MEMOLUB® VISIO EP OIL R-500
24V powered, reusable single & multi-point lubrication system with visual feedback for oil applications. Up to 8 outlets. Remote installation up to 8m. 72 settings or PLC driven -
MEMOLUB® VISIO MEMO BASE
Electronic stroke and frequency regulator and home to the onboard visual feedback system. Delivered with a settings key. -
MEMOLUB® VISIO OIL R-500
Battery powered, reusable single & multi-point lubrication system with visual feedback for oil applications. Up to 8 outlets. Remote installation up to 8m. 72 settings. -
New
Memolub® Visio PRO
- Reusable autonomous single & multi-point lubrication system
- Visual alerts
- 24V Powered.
- 25 bar ejection pressure
- Up to 12 lubrication points simultaneously
- Remote installation up to 8m
- 62 frequency settings + PLC driven settings.
- Reusable autonomous single & multi-point lubrication system
-
New
MEMOLUB® WRENCH
Your essential tool for effortless Memolub installations. -
METAL ELBOW FITTING G1/4M-G1/4F
Standard application. -
METAL PUSH-IN Y FITTING T6
Standard application. -
METAL PUSH-IN Y FITTING T8
Standard application. -
OIL SPLITTER
For oil applications only. Applicable on all MEMOLUB® HPS, EPS, EPS MEMORY and PLCD devices. -
OIL SPLITTER KIT
Including a Oil Splitter (Ref. 1900) and the necessary fittings. -
PREFILLED TUBE T8 - 8m - Castrol Optileb GR UF 1 H1
-
PREFILLED TUBE T8 - 8m - Castrol Tribol GR 100-2PD
-
PREFILLED TUBE T8 - 8m - Castrol Tribol GR 1350-2,5PD
-
PREFILLED TUBE T8 - 8m - Castrol Tribol GR 400-2PD
-
PREFILLED TUBE T8 - 8m - Castrol Tribol GR CLS2
-
PREFILLED TUBE T8 - 8m - Castrol Tribol GR XT2 HT
-
PUSH-IN ELBOW FITTING TAPER T4-G1/8M
Standard application. -
PUSH-IN ELBOW FITTING TAPER T6-G1/8M
Standard application. -
PUSH-IN ELBOW FITTING TAPER T8-G1/8M
Standard application. -
PUSH-IN MALE/MALE G-1/8
Standard application. -
PUSH-IN STRAIGHT FITTING TAPER T4-G1/8M
Standard application. -
PUSH-IN STRAIGHT FITTING TAPER T4-M6
Standard application. -
PUSH-IN STRAIGHT FITTING TAPER T8-G1/8M + CHECK VALVE IN
For oil applications only. -
PUSH-IN STRAIGHT FITTING TAPER T8-G1/8M + CHECK VALVE OUT
For oil applications only. -
PUSH-IN UNION FITTING T6
Standard application. -
PUSH-IN UNION FITTING T8
Standard application. -
PUSH-IN Y FITTING T6
Standard application. -
PUSH-IN Y FITTING T8
Standard application. -
ROUND LUBRICATION BRUSH 15mm (HOG HAIR / POLYESTER) + ADAPTOR
For oil applications only. Maximum temperature: 180°C. -
ROUND LUBRICATION BRUSH 16mm (NYLON)
NPT-1/8-F. Maximum temperature: 100°C. -
ROUND LUBRICATION BRUSH 18mm (STAINLESS STEEL)
NPT-1/8-F. For applications above 180°C. -
ROUND LUBRICATION BRUSH 30mm (HOG HAIR / POLYESTER) + ADAPTOR
For oil applications only. Maximum temperature: 180°C. -
ROUND LUBRICATION BRUSH 30mm (HOG HAIR / POLYESTER) FEMALE
G-1/8-F. For applications above 180°C. -
ROUND LUBRICATION BRUSH 40mm (STAINLESS STEEL)
NPT-1/8-F. For applications above 180°C. -
ROUND LUBRICATION BRUSH 50mm (HOG HAIR / POLYESTER) + ADAPTOR
For oil applications only. Maximum temperature: 180°C. -
New
SCREW CONNECTOR KIT
Including a 24V male connector M12 RSC 5/7 + 10 meters of electric cable for MEMOLUB® EPS (Ref. 6020, Ref. 6021, Ref. 6022, Ref. 6027 ). -
SINGLE POINT / SPLITTER BRACKET
Stainless steel -
SINGLE POINT / SPLITTER BRACKET KIT
Including Single Point / Splitter Bracket (Ref. 7201) + Bras Metal Straight Fitting T8-G1/4F (Ref. 2289) -
SPRAY NOZZLE
For liquid grease spraying. Compatible with all MEMOLUB® VISIO, VISIO EP, HPS, EPS, EPS MEMORY and PLCD devices. -
STROKE WASHER CLIPS
Per 40 units. Stroke volume regulator. Applicable on all MEMOLUB® VISIO, VISIO EP, HPS, EPS, EPS MEMORY and PLCD devices. -
STROKE WASHERS
Per 250 units. Stroke volume regulator. Applicable on all MEMOLUB® VISIO, VISIO EP, HPS, EPS, EPS MEMORY and PLCD devices. -
TUBE BLUE T6 (RILSAN)
Compatible with MEMOLUB® DS. For compressed air installation. Up to 6 bar. Maximum temperature 70°C -
TUBE BLUE T8 (RILSAN)
Compatible with MEMOLUB® DS. For compressed air installation. Up to 6 bar. Maximum temperature 70°C -
TUBE CUTTER
Your essential tool for effortless tube cutting. -
TUBE FIXATION T6
-
TUBE FIXATION T8
-
TUBE T6 (POLYAMIDE/NYLON) - 1M
For oil applications only. Up to 30 bar. Maximum temperature 70°C -
TUBE T6 (PTFE) - 1M
For high temperature applications. Up to 30 bar. Maximum temperature 220°C -
TUBE T8 (POLYAMIDE/NYLON) - 1M
Standard application. Up to 30 bar. Maximum temperature 70°C -
TUBE T8 (PTFE) - 1M
For high temperature applications. Up to 30 bar. Maximum temperature 220°C -
UNION ELBOW FOR DISTRIBUTOR KIT
For Distributor Block DB4/6/8. G-1/8 -
UNION ELBOW FOR DISTRIBUTOR KIT
For Distributor Block DB4/6/8. G-1/8
Step 1 - Outer diameter
*Longer lengths of 6mm & 1/4" outer diameter tubing can be filled with oils or lower NGLI greases.
Step 2 - Material
Step 3 - Length
Step 4 - Lubricant
Choose your preferred brand
Overview & piece count
Please complete all steps.
- Outer diameter:
- Material:
- Length:
- Lubricant:
Order Reference: